Panasonic GT05

1-14
Related software (Freeware)
Item name
Contents
Configurator WD IP address search tool
Address setting for the GT in Ethernet communication
Note) It can be downloaded from our website (https://industrial.panasonic.com/ac/e/dl_center/software/).
(User registration is required. Free of charge)
Screen transfer cable
For connection between PC (USB) and Programmable Display (GT02/GT02L/GT03-E/GT05/GT12/
GT32/GT32-R/GT32-E)
USB cable (Commercial product)
Applicable model
Cable type
Length
GT05/GT32/
GT32-R/GT32-E
USB2.0 (or 1.1) AB type
Max. 5 m
GT02/GT02L/
GT03-E/GT12
USB2.0 (or 1.1) cable
A type (Male): miniB type male
Max. 5 m
Note) Windows 2000 or later OS is required for the communication with a USB.
For connection between PC (RS232C) and Programmable Display (GT01/GT11/GT21)
D-sub connector cable
PC side
connector
GT side
connector
Specification
Product No.
D-sub 9-pin
Mini DIN
round 5-pin
L type (3 m)
AFC8503
Straight type
(3 m)
AFC8503S
Note) A USB/RS232C conversion cable is necessary to connect with a personal computer without a
serial port using a PC connection cable.
Between PC (USB) and Programmable Display (GT01 / GT11 / GT21)
Recommended USB/RS232C conversion cable
USB conversion cable manufactured by Diatrend Corporation
Product name
DFP0-U2
Applicable model
GT01 / GT11 / GT21
Conversion method
Between USB and RS232C
Length
2m
Power supply
Bus power (supplied from the USB host controller or from the hub)
USB connector
Type A Plug
Consumption current (max)
50mA
I/O specifications
Complies with USB Specification Rev1.1
Operating ambient temperature
5 to 40 C
Storage ambient temperature
-20 to 60 C
Operating ambient humidity
10% to 80 %RH (non-condensing)
Storage ambient humidity
10% to 80 %RH (non-condensing)
Note) For details about the USB conversion cable, please contact Diatrend Corporation
(http://www.diatrend.com/).