15
VQT3Y13
The card and built-in memory can be selected separately to record motion pictures or still pictures.
1 Change the mode to .
2 Select the menu. (l 19)
3 Select the media for recording the motion pictures and the media for
recording the still pictures using 3/4/2/1, and press the ENTER
button.
≥ The media is selected separately to motion pictures or still pictures is highlighted in yellow.
≥ Select and press the ENTER button to return to the previous screen. (settings will not
be changed)
4 Press the MENU button to complete the settings.
The modes (appropriate for the condition) are set just by pointing the unit to what you want to
record.
Basic
Selecting a media to record [HC-V100M]
: [MEDIA SELECT]
Basic
Intelligent Auto mode
Intelligent auto/Manual button
Press this button to switch Intelligent
Auto Mode/Manual Mode.
HC-V100&V100MGC_GW_GN_VQT3Y13_mst.book 15 ページ ２０１２年１月５日 木曜日 午後６時１６分
To Next Page
Loading...
