Panasonic HC-V10K - Language Selection; How to Use the Cursor Button; Selecting a Mode

14
VQT4C31
∫ Turning the unit on/off
Turning the unit on and off with the
power button
Press the power button to turn on the unit.
A The status indicator lights on.
≥ To turn off the unit, hold down the power
button until the status indicator goes off.
Turning the unit on and off with the LCD
monitor
Opening the LCD monitor turns on the unit.
Closing the LCD monitor turns off the unit.
To turn on the unit
A The status indicator lights on.
To turn off the unit
B The status indicator goes off.
∫ Selecting a mode
Operate the mode switch to change the
mode to or .
∫ How to use the cursor button
≥ Use the cursor button to select the
recording functions and playback
operations, and to operate the menu
screen.
≥ In this owner’s manual, the cursor button
is denoted as shown below or as
3/4/2/1.
Example: For pressing the (down) button.
∫ Language selection
1) Press the MENU button, then select
[SETUP] # [LANGUAGE].
2) Select desired language.



Recording Mode (l 32, 34)
Playback Mode (l 37, 63)
or Press 4
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 14 ページ ２０１２年１月１３日 金曜日 午後８時２分