47
VQT4C31
This item is used to start the unit demonstration.
(Only when the mode is at the position)
If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD
card inserted and while this unit is connected to the AC adaptor, the demonstration
automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take
place for approx. 5 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the position)
Select [O.I.S. DEMO] and press the ENTER button, the demonstration automatically starts.
When you press MENU button, the demonstration will be canceled.
You can select the language on the screen display and the menu screen.
[DEMO MODE]
[ON]/[OFF]
[O.I.S. DEMO]
[LANGUAGE]
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book 47 ページ ２０１２年１月１３日 金曜日 午後８時２分
To Next Page
Loading...
