- 60 -
Protecting scenes/still pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Change the mode to .
1 Select the menu.
* [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected
transfer setting device in advance on the computer.
2 Select the scene/still picture to be protected using the cursor button, then
press the ENTER button.
≥ The scene/still picture is selected and the indication appears on the thumbnail. Press the
ENTER button again to cancel the operation.
≥ Press the MENU button to complete the settings.
: [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT]*
HC-V160-EB&EP&GC&GA&GW&GN-SQW0092_mst.book 60 ページ ２０１４年１１月４日 火曜日 午後６時１５分
To Next Page
Loading...
