- 111 -
∫ To save a manually-edited scene
You can save manually edited scenes as a single scene.
/ / / ///
The recorded scenes can be saved in the SD card.
//
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of a manually-edited scene or wait until the playback is
finished.
2 Touch [SAVE].
3 Select the format to save.
(When [AVCHD 1920k1080/50i] is selected)
≥ Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.
≥ Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.
4 Touch [YES].
≥ If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].
5 / / / ///
Touch [EXIT].
//
Touch [COPY] or [EXIT].
≥ Scenes saved in the built-in memory can be copied to the SD card. To copy to the SD card,
select [COPY].
≥ Operate according to the message and touch [EXIT] at the end.
≥ You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.
≥ series/ series/ series
Manually-edited scenes recorded as Backup for Twin Camera will be saved as normal AVCHD or
MP4 scenes.
≥ For information on the approximate free space requirements for saving a manually edited scene,
refer to page 109.
[AVCHD 1920k1080/50i]: It will be saved in high-definition image quality.
[MP4 1280k720/25p]: It will be saved with an image quality, allowing you to upload it on
the Internet in higher image quality. The format supports playback
on a PC.
[MP4 640k360/25p]: It will be saved with an image quality, allowing you to upload it on
the Internet faster. The format supports playback on a PC.
WX970M
VX870 VX878
WX970M
To Next Page
Loading...
