To Next Page
Z
zfoxSep 8, 2025
Why doesn't my Panasonic HC-VX981 recognize the SD card?
- Ddawn74Sep 9, 2025
If your Panasonic Camcorder does not recognize the SD card, and the SD card is formatted on a PC, format the SD card using the camcorder.
Why doesn't my Panasonic HC-VX981 recognize the SD card?
If your Panasonic Camcorder does not recognize the SD card, and the SD card is formatted on a PC, format the SD card using the camcorder.
Why does my Panasonic HC-VX981 Camcorder keep stopping recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure you are using an SD card suitable for motion picture recording. If the card's data writing speed has deteriorated, format the SD card using the unit. Also, if [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
Why is there no sound or picture when connecting my Panasonic Camcorder to the TV?
If your Panasonic Camcorder is connected to a TV but you are not getting any image or sound output, or the image appears squeezed, ensure you have selected the correct input channel on your TV as described in your TV's operating instructions. You may also need to adjust the [TV ASPECT] setting on your camcorder to match the TV's aspect ratio. Note that audio during playback is output from the TV, not the camcorder, so adjust the sound on the TV.
What to do if my Panasonic HC-VX981 Camcorder is not operating normally?
If your Panasonic Camcorder is on but not responding, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit back on. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
How to fix auto focus on Panasonic HC-VX981 Camcorder?
If the Auto Focus function on your Panasonic Camcorder isn't working, switch to Intelligent Auto Mode or Intelligent Auto Plus Mode. If you're recording a scene that's difficult to focus on in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
Why does the image color or brightness change on my Panasonic Camcorder, or why do I see horizontal bars?
Changes in color or brightness, or the appearance of horizontal bars in the image, can occur when recording under fluorescent, mercury, or sodium lighting. This is not a malfunction. In Motion Picture Recording Mode, use Intelligent Auto Mode/Intelligent Auto Plus Mode, or adjust the shutter speed: when [REC FORMAT] is set to [24p], set the shutter speed to 1/50 seconds (50 Hz areas) or 1/60 seconds (60 Hz areas); when [REC FORMAT] is set to a setting other than [24p], set to 1/100 seconds (50 Hz) or 1/60 seconds (60 Hz). This issue does not affect Still Picture Recording Mode. Setting the shutter speed to 1/120 seconds can reduce the problem in FULL HD Slow Motion Mode and Slow & Quick Video Mode (WXF991).
What to do if my Panasonic HC-VX981 Camcorder does not operate normally?
If your Panasonic Camcorder is not operating normally, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. Wait another minute before turning the unit on again. Note that doing this while the media is being accessed might damage the data. If this doesn't restore normal operation, it is recommended to detach the power connected, and consult the dealer who you purchased this unit from.
What to do if “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” is displayed on my Panasonic HC-VX981 Camcorder?
If you see the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” on your Panasonic Camcorder, the unit has detected an error. Try restarting the unit by turning it off and then on again. If the unit is not turned off and on, it will turn off automatically in about 1 minute. If the error message continues to appear after restarting, repair is needed. It is recommended to detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the camcorder yourself.
Why is the color balance off on my Panasonic Camcorder?
If the color balance of images from your Panasonic Camcorder appears strange when recording in places like a gymnasium, which have multiple light sources, set the White Balance setting to (Indoor mode 2). If you still cannot record clearly with (Indoor mode 2), set it to (Manual adjustment mode).
Why does my Panasonic HC-VX981 Camcorder image flicker indoors?
If the color or brightness of the image changes, or horizontal bars appear when recording with your Panasonic Camcorder under fluorescent, mercury, or sodium light, try recording in Intelligent Auto Mode/Intelligent Auto Plus Mode. Alternatively, adjust the shutter speed. When [REC FORMAT] is set to [24p]: Set to 1/50 seconds in areas where the power supply frequency is 50 Hz, or 1/60 seconds in areas where the frequency is 60 Hz. When [REC FORMAT] is set to a setting other than [24p]: Set to 1/100 seconds in areas where the power supply frequency is 50 Hz, or 1/60 seconds in areas where the frequency is 60 Hz. Setting the shutter speed to 1/120 seconds reduces the intensity of the problem in FULL HD Slow Motion Mode or Slow & Quick Video Mode (For the WXF991).
Identifies and describes the key external components and buttons of the camera.
Details on compatible batteries, inserting/removing, and charging the unit.
Information on using SD cards, including speed class ratings and insertion/removal.
Step-by-step instructions for starting, pausing, and stopping motion picture recording.
Details on how to take still pictures, including focus indications.
Explains how to select and play back recorded motion pictures and still pictures.
Explains how to use HDR Movie Mode to minimize gradation loss in bright and dark areas.
Details on using the Sub Camera for simultaneous recording and twin camera setups.
Explains how to select different recording modes like Intelligent Auto and Manual.
Covers manual adjustments for focus, white balance, shutter speed, and iris.
Instructions for connecting a USB HDD to copy and play back recorded content.
Overview of Wi-Fi capabilities, safety precautions, and connection requirements.
Details on connecting the unit to a wireless access point or smartphone.
Enables display and simultaneous recording of images from smartphones in Sub Windows.
Steps for connecting a smartphone as a Wireless Sub Camera for Twin Camera.
Overview of PC functionalities using HD Writer AE 5.3 software.
Steps to connect the camera to a PC for data transfer and software interaction.
Common problems and their solutions related to power, recording, and auto focus.
Important safety and usage guidelines to prevent damage or malfunction.
General| Sensor Type | BSI MOS Sensor |
|---|---|
| Sensor Size | 1/2.3-inch |
| Effective Pixels (Motion Image) | 8.29 megapixels |
| Lens | Leica Dicomar Lens |
| Optical Zoom | 20x |
| Recording Media | SD/SDHC/SDXC Memory Card |
| Wi-Fi | Yes |
| HDMI | Yes (micro HDMI) |
| Focal Length | 4.08 - 81.6mm |
| Focus | Auto/Manual |
| Speaker | Dynamic type |
| Touch Screen | Yes |
| Digital Zoom | 60x / 1500x |
| Display | 3.0-inch LCD (460, 800 dots) |
| Video Resolution | 4K (3840 x 2160) |
| USB | Yes (Micro USB) |
| Weight (w/o battery) | 351g |
| Aperture | F1.8 |
| White Balance | Auto/Indoor |
| Recording Format | MP4 |
| Video Recording Mode | 4K: 3840 x 2160 30p |
| Audio Recording Format | AAC (2ch) |
| Microphone | Stereo |
| External Microphone Input | Yes |
| Headphone Jack | Yes |
| Battery Type | Lithium-ion |
| Image Stabilization | HYBRID O.I.S.+ (Optical Image Stabilization) |
| Dimensions (W x H x D) | 65 x 73 x 139 mm (2.56 x 2.87 x 5.47 inch) |
