Panasonic HC-VX981 - Page 110

- 110 -
4 Touch .
5 Touch the desired zoom speed.
≥ The scene will be skipped to the end point.
Depending on the set zoom speed, the end point will
vary.
≥ Touch [OK].
6 Adjust the size and position of the cropping
frame for the end point.
≥ The cropping frame for the end point will be displayed in the same position as the cropping
frame for the start point.
≥ The cropping frame for the start point is indicated in gray, while the cropping frame for the
end point is indicated in white.
≥ To reset the cropping frame for the start point, touch .
≥ Perform the same operations as Step 3 to change the size and position of the cropping
frame.
7 Touch .
≥ A preview will start.
≥ You cannot apply this function to scenes shorter than 3 seconds (approx.).
1 Touch the scene to which you want to apply the function.
≥ Touch [OK].
2 Perform playback operations to set a preview start point.
≥ You will find it convenient to use slow playback and Frame-by-frame Playback. (l 103)
3 Touch the subject to lock the target.
A Target frame
B Cropping frame
≥ The cropping frame B will be displayed in a size that
matches the subject.
≥ To touch another subject, touch .
4 Touch .
≥ A preview will start.
5 Touch to end the preview.
≥ A confirmation message appears.
Touch [EXIT] to end the preview.
∫ Notes on the target frame
≥ If the target frame fails to lock the target, it will flash red and then disappear.
Touch a distinct portion of the subject (color, etc.), or reset the preview start point and then lock
the target again.
≥ When a preview is played back until the end of the scene or the playback time of a preview
exceeds 20 minutes (approx.), the preview will end automatically.
If you save the image, the previewed portion (from the start point to the end point) will be saved.
[Fast]/[Slow]
Applying [Tracking Crop]
0h00m15s0h00m15s0h00m15s
BA