- 47 -
This item is used to start the Optical Image Stabilizer demo.
≥ Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be canceled.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 152.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 153.
You can connect this unit and a PC with the USB cable and check software information (License) on the PC.
1 Select the menu.
2 Connect this unit to a PC.
≥
A message will be displayed when the connection is complete. On the PC, confirm [LICENSE.TXT].
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
Display the authentication information for this unit.
≥ The contents in [Approved Regulations] cannot be displayed on external devices. Check them on
the LCD monitor of this unit.
[O.I.S. DEMO]
: [SETUP] # [O.I.S. DEMO]
[Eye-Fi TRANSFER]
[Eye-Fi DIRECT]
[SOFTWARE INFO]
: [SETUP] # [SOFTWARE INFO]
[Approved Regulations]
: [SETUP] # [Approved Regulations]
MENU
MENU
MENU
To Next Page
Loading...
