EasyManua.ls Logo

Panasonic HC-WXF995 - User Manual

Panasonic HC-WXF995
270 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions
4K Video Camera
Model No.
HC-WXF995
HC-WXF995M
HC-VXF995
HC-VX985
HC-VX985M
Please read these instructions carefully before using this product, and save this manual for future
use.
DVQP1262ZA
until
2017/02/28

Table of Contents

Other manuals for Panasonic HC-WXF995

Questions and Answers

  • A
    Anthony SimpsonSep 22, 2025
    How to delete scenes on Panasonic HC-WXF995?
    • E
      Edward MclaughlinSep 22, 2025
      To delete scenes from your Panasonic Camcorder, release the protect setting. Any scenes/still pictures where the thumbnails are displayed as cannot be deleted. If the scenes/still pictures are unnecessary, format the media to erase the data.
  • G
    Glenn MooreAug 23, 2025
    Why Panasonic Camcorder won't turn on or battery drains fast?
    • M
      Mark SmithAug 23, 2025
      If your Panasonic Camcorder cannot be turned on, does not stay on long enough, or the battery runs down quickly, try the following: * Charge the battery again to ensure it is sufficiently charged. * Keep in mind that in cold places, the battery usage time becomes shorter. * If the operating time is still too short even after fully charging the battery, it may be worn out and need replacement.
  • J
    jharmonAug 25, 2025
    What to do if Panasonic HC-WXF995 Camcorder is not detected by PC via USB?
    • J
      Janet WrightAug 25, 2025
      If your Panasonic Camcorder is not detected by the PC when connected by the USB cable: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on your PC. * Check the operating environment of your PC. * Restart your PC and the camcorder, then reconnect the USB cable.
  • M
    Margaret HowardAug 27, 2025
    What to do if my Panasonic HC-WXF995 Camcorder is on but not operating normally?
    • S
      simpsonchristopherAug 27, 2025
      If your Panasonic Camcorder is on but not functioning correctly, remove the battery or AC adapter, wait about a minute, and then reconnect it. Wait another minute before turning the unit back on. If this doesn't restore normal operation, the unit may require repair.
  • J
    Jordan MooreAug 27, 2025
    What to do if Panasonic HC-WXF995 Camcorder is on but not working?
    • J
      Jonathan SingletonAug 27, 2025
      If your Panasonic Camcorder unit cannot be operated even though it is turned on, or it does not operate normally: * Remove the battery or AC adapter, wait about 1 minute, and then reconnect it. * Wait another minute, then turn the unit on again. * If normal operation is still not restored, disconnect the power and consult the dealer from whom you purchased the unit.
  • A
    Amanda SmithSep 18, 2025
    Why does Panasonic HC-WXF995 Camcorder image flicker or show bars indoors?
    • C
      Colleen RangelSep 18, 2025
      If you are experiencing colour or brightness changes, horizontal bars, or flickering on the LCD monitor of your Panasonic Camcorder, it may be due to recording under fluorescent, mercury, or sodium light. In Motion Picture Recording Mode, record in Intelligent Auto Mode/Intelligent Auto Plus Mode or set the shutter speed according to the power supply frequency. Note that in Still Picture Recording Mode, this will not affect the recorded image. Setting the shutter speed to 1/100 seconds may reduce the intensity of the problem.
  • B
    Brittany MillerSep 15, 2025
    Why can't I copy scenes from Panasonic HC-WXF995 Camcorder SD card via USB?
    • D
      Debra GreenSep 15, 2025
      If you cannot copy scenes on the SD card by connecting your Panasonic Camcorder to other equipment with the USB cable: * The other equipment might not have recognized the SD card. * Unplug the USB cable once, and reconnect it.
  • L
    lisachavezSep 16, 2025
    Why does my Panasonic HC-WXF995 Camcorder turn off automatically?
    • L
      lisawaltonSep 16, 2025
      If the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. If you are not using the VIERA Link, set [VIERA Link] to [OFF].
  • C
    catherineallisonSep 6, 2025
    Why Panasonic Camcorder has no sound or picture on TV?
    • G
      gwendolynavilaSep 6, 2025
      If your Panasonic Camcorder is correctly connected to a TV, but you are not getting images or sounds, or the images are squeezed horizontally: * Refer to your TV's operating instructions and select the channel that matches the input used for the connection. * Change the [TV ASPECT] setting to match the aspect ratio of your TV. * Note: Audio during playback mode is not output from the unit when connected to a TV.
  • N
    nelsonchristineSep 3, 2025
    What to do if Panasonic HC-WXF995 doesn't recognize SD card?
    • F
      fletcherrachelSep 3, 2025
      If the SD card inserted in your Panasonic Camcorder is not recognized, it may be because the SD card was formatted on a PC. Use this unit to format SD cards.

Panasonic HC-WXF995 Specifications

General IconGeneral
Sensor TypeMOS
LensLEICA DICOMAR
Optical Zoom20x
Intelligent Zoom30x
Focal Length4.08 - 81.6 mm
Image StabilizerHybrid O.I.S.+
FocusAuto / Manual
Touch PanelYes
Recording MediaSD/SDHC/SDXC Memory Card
MicrophoneStereo
Wi-FiYes
NFCYes
Camera TypeCamcorder
Sensor Size1/2.3 type
Video Resolution4K
Total Pixels18.91 megapixels
Effective Pixels (Motion Image)8.29 MP
ApertureF1.8 - F4.0
LCD Monitor3.0 inch
Viewfinder0.24 inch
Recording FormatMP4, AVCHD
Video Compression FormatMPEG-4 AVC/H.264
Audio Recording FormatDolby Digital (2ch), AAC (2ch)
HDMIYes (HDMI micro)
USBUSB 2.0
35 mm Film Camera Equivalent (Still Image)28 - 560 mm
SpeakerBuilt-in Speaker

Related product manuals