8
Panasonic Industrial Devices SUNX Co., Ltd.
http://panasonic.net/id/pidsx/global
Overseas Sales Dept. (Head Oce)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telefon: +81-(0)-568-33-7861 FAX: +81-568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Robert-Koch-Straße 100, D-85521 Otttobrunn, Germany
Telefon: +49-89-45354-1000
15
Specications
Discrete wire
HG-
C1030L3-P
HG-C1050L3-P HG-C1100L3-P
HG-
C1200L3-P
HG-C1400L3-P
M12 connector
HG-
C1030L3-P-J
HG-C1050L3-P-J
HG-C1100L3-P-J
HG-
C1200L3-P-J
HG-C1400L3-P-J
Measurement center
distance
30mm 50mm 100mm 200mm 400mm
Measurement range ±5mm ±15mm ±35mm ±80mm ±200mm
Repeatability 10µm 30µm 70µm 200µm
● 300µm
(measurement distance 200 to 400mm)
● 800µm
(measurement distance 400 to 600mm)
Linearity ±0,1% F.S. ±0,2% F.S.
● ±0,2% F.S.µm
(measurement distance 200 to 400mm)
● ±0,3% F.S.
(measurement distance 400 to 600mm)
Temperature charac-
teristic
0.03%F.S./°C
Beam diameter
3
≈ 50µm ≈ 70µm ≈ 120µm ≈ 300µm ≈ 500µm
Light source
Red semiconductor laser class 2 (JIS / IEC / FDA
2
)
Max. output: 1mW, emission peak wavelength: 655nm
Supply voltage 24V DC ±10% including ripple max. 10% (P-P)
Power consumption Max. 40mA (at 24V DC supply voltage)
Control Output
PNP open-collector transistor
● Maximum source current: 50mA
● Applied voltage: same as supply voltage (between control output to +V)
● Residual voltage: max. 1.5V (at 50mA source current)
● Leakage current: max. 0.1mA
Output operation Selectable either Light-ON or Dark-ON
Short-circuit
protection
Incorporated (auto-reset)
Response time Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms)
IO-Link communication
● IO-Link specication: Ver1.1
● Baud rate: COM3 (230.4kbps)
● Process data length: 4byte
Degree of protection IP67 (IEC)
Degree of pollution 2
Ambient temperature
-10 to +45°C (no dew condensation or icing allowed)
Storage: -20 to +60°C
Ambient humidity 35 to 85% RH, at storage: 35 to 85% RH
Ambient illumination 3000ℓx max. (Illumination level of light receiving surface under incandescent light)
Operating altitude Max. 2000m
4
Cable
Discrete wire: 0.2mm
2
4-core PVC cable, 2m long
M12 connector: 0.2mm
2
4-core PVC cable, 0.3m long with connector
Material Enclosure: die-cast aluminum, front cover: acrylic
Weight ≈
35g (without cable), ≈ 85g (including cable)
Applicable standards EMC Directive
1
Measurement conditions: 24V supply voltage, 20°C ambient temperature, 10ms response time. The subject is white ceramics.
2
This is based on the FDA Standard, according to Laser Notice No. 50 of the FDA Standard
3
This is the size in the measurement center distance. These values were dened by using 1/e
2
(approx. 13.5%) of the center light intensity. Due to leak light
outside the specied area, the reectance around the detecting point may be higher than at the point and this may aect the measurement value.
4
Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0m