To Next PageTo Next PageHow to fix temperature sensor error (F01) in Panasonic HL-BD82S Oven?
If your Panasonic Oven displays a temperature sensor error (F01), it could be due to a shorted or broken temperature sensor, bad connections, or a faulty power board. Try these solutions: * Replace the temperature sensor. * Check the connectors and the harness. * Replace the power board.
What to do if Panasonic Oven displays over temperature error (F05)?
If your Panasonic Oven shows an over temperature error (F05) while cooking, it's possible that one or more relays are stuck, driving the heating elements. Check the contact of the relay and consider replacing the power board.
How to troubleshoot latch mechanism error (F03) in Panasonic HL-BD82S Oven?
If your Panasonic Oven displays a latch mechanism error (F03), the cause may be a latch motor problem, a broken door micro switch during self-clean, bad connections, or a defective power board. Consider the following: * Replace the motor. * Replace the door micro switch. * Check the motor and micro switch connections. * Replace the power board.
What causes over temperature error (F07) during self-clean in Panasonic HL-BD82S Oven?
If your Panasonic Oven detects over temperature during self-clean (F07), it's likely that one or more relays are stuck, which are driving the heating elements. Check the contact of the relay and replace the power board.
Why Panasonic Oven is not operative and has no power?
If your Panasonic Oven is not operative and has no power supply, the issue might be with the main breaker or fuses, or a short circuit. You should replace the fuses and find and remove any short circuits.
How to fix short circuit error (F09) on Panasonic HL-BD82S Oven display board?
If your Panasonic Oven has a possible short circuit on display board micro pins (F09), it might be due to humidity causing condensation on the circuits or a short circuit on the display board. Remove power and dry the board, or replace the display board.
What causes display board eeprom data error (F11) in Panasonic HL-BD82S Oven?
If your Panasonic Oven shows error (F11) - display board eeprom data error, it could be due to the first power up, a new board installed, memory access issues, a bad cable connection, or a defective circuit on the display board. You can configure the oven model, replace the power board, check or replace the cable, or replace the display board.
How do I resolve a short circuit error (F10) on my Panasonic Oven's display board?
If your Panasonic Oven has a possible short circuit on display board circuits (F10), it could be due to humidity causing condensation, a short circuit on display board connectors, or a short circuit on the display board itself. Remove power and dry the board, check connectors and clean or replace the board to board cables, or replace the display board.
Why is my Panasonic HL-BD82S overheating (F12) during cooking?
If the electronic boards in your Panasonic Oven are overheating in cooking modes (F12), the cooling fan might be broken, there could be bad connections, insufficient airflow, a defective cooling fan relay, or a faulty ntc sensor. Try replacing the cooling fan, checking the connections, ensuring proper installation and free airflow, or replacing the main power board.
What to do if Panasonic HL-BD82S Oven does not run, but the power is on?
If your Panasonic Oven does not run, but the power supply is okay, the problem might be with the connections to the display or the power board. Replace the power board.
General| Type | Microwave Oven |
|---|---|
| Turntable | Yes |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cooking Levels | 5 |
| Color | Silver |
Read all instructions carefully to reduce the risk of burns, electric shock, fire, and injury.
Do not store items above the oven; avoid flammable materials and grease fires.
Tie hair, avoid touching hot elements/surfaces, and do not heat unopened containers.
Do not leave items in oven during Self-Cleaning; clean door gasket carefully.
Identifies key components like vents, elements, lights, and control panel.
Lists and illustrates oven racks, broiler pan, extendable rack, and meat probe.
Instructions for initial setup and preparation before the first use.
Explains how to use child lock, user lock, and auto lock features.
Describes noises, symbols, and beeps indicating oven status.
Explains default cooking temperatures and user options for saving settings.
Discusses moisture evaporation and accurate temperature maintenance.
Provides advice on using charts, opening the door, interior lights, and selecting cookware.
Details rack guides, positions, and proper placement for baking.
Lists benefits like even browning, juiciness, and time savings.
Steps for selecting a cooking mode and adjusting the temperature.
Explains how to use Dehydrate, Defrost, Proof, and Warming modes.
Describes the preheating process and the fast preheat function.
Step-by-step instructions for setting a specific cooking duration.
Guide on scheduling the oven to start cooking at a later time.
Lists food items suitable for the Convection Bake mode.
Illustrates rack positions and offers tips on adjusting standard baking recipes for convection.
Provides essential tips for successful baking, including rack usage and utensil selection.
A reference table for baking temperatures, rack positions, and cooking times for various food items.
A table of food items, rack positions, temperatures, and times for convection broiling.
A reference table for broiling settings, rack positions, and cooking times for various foods.
USDA guidelines for safe internal cooking temperatures for various meats and dishes.
A table providing recommended temperatures, times, and internal temperatures for roasting various meats.
A reference table for pizza cooking temperatures and times.
A table detailing preparation, drying times, and doneness tests for various foods.
Explains the pyrolytic self-cleaning function and its operation.
Steps to take before initiating the self-cleaning cycle.
Instructions on how to interpret and use the provided cleaning chart.
Provides contact details for warranty assistance and locating service centers.
