- 11 -
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
≥ “h” is an abbreviation for hour, “min” for minute and “s” for second.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
≥ The power lamp flashes (Flashing with approx. 0.5 second period (off for approx. 0.25 second, on
for approx. 0.25 second)) when the remaining battery time becomes low.
You can check the battery level by looking at the “Image App” screen (l 28) or the recording
mode lamps (l 15).
≥ This unit heats up after use or charging. This is not a malfunction.
≥ For information about charging with a mobile USB charger or an AC adaptor, check the support
site.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This site is English only.)
Charging time Pixels/Frame rate
Maximum continuous
recordable time
Actual recordable
time
3h
[1920k1080/30p] 1 h 15 min
35 min
[1280k720/60p] 1 h 5 min
[1280k720/30p] 1h20min
40 min
[848k480/30p] 1h25min
[1280k720/60fps]
1h10min 35min
[848k480/120fps]
The socket outlet shall be installed near the equipment and shall be easily accessible.
To Next Page
Loading...
