- 29 -
Recording with this unit
Record images with this unit.
≥ You can record images even when this unit is not connected to a smartphone.
1 Press the recording mode/Wi-Fi button to switch to the desired
recording mode.
≥ The recording mode changes each time you press the button. The recording
mode lamps will light (or flash).
Motion Picture Recording Mode # Slow Motion Recording Mode # Still Picture
Recording Mode
*1 You need to set [Recording Mode] of the “Image App” to [Loop Recording]. (l 32)
*2 You need to select a setting other than [OFF] for [Interval rec mode] of the “Image App”. (l 33)
2 Press the recording start/stop button.
In Motion Picture Recording Mode/Slow Motion Recording Mode:
The access lamp will light red and recording will start.
≥ If you press the recording start/stop button again, the recording will
stop. While data is being recorded, the access lamp will flash. Do not
remove the microSD card until the access lamp goes off.
≥ For information about the [Slow Motion] or [Loop Recording], refer to
page 32.
In Still Picture Recording Mode:
Recording still pictures.
≥ In [Interval rec mode], the access lamp will light red and recording will
start. If you press the recording start/stop button again, the recording will stop. (l 33)
Recording Mode
Recording mode
lamp
Recording method
Motion Picture
Recording Mode
Lit
[Normal Shooting]:
Recording motion pictures.
Flashing
[Loop Recording]
*1
:
No matter how long you record, you can only
record motion pictures for the last 1 hour to
microSD card.
Slow Motion Recording
Mode
Lit
[Slow Motion]:
This records motion pictures in slow motion by
setting a high frame rate (increasing the number
of frames).
Still Picture Recording
Mode
Lit
Normal still picture recording:
Recording a still picture.
Flashing
[Interval rec mode]
*2
:
This is for recording still pictures at a set interval.
To Next Page
Loading...
