VQT3P46 11
k To prevent water leaking into the camera, please observe the
following precautions before using it.
k Check that there is sufficient battery power and card memory
remaining.
k Do not open or close the battery cover or terminal cover in places
with sand and dust, or with wet hands.
k At the time of purchase, the battery cover lock is in the locked
position. When opening the battery cover, first release the lock.
1 Check that there is no foreign matter on the inner side of the battery
cover or terminal cover (where the rubber seal 1 contacts the
camera body 2).
h If the rubber seal inside the battery cover or terminal cover is cracked
or deformed, consult the store where the camera was purchased or a
nearby service centre.
Battery cover lock
Red part
(coloured label)
Terminal cover lock
1
1
2
2
Terminal cover
Battery cover
Hair, lint
Liquid
Crack,
deformation
Sand, dust
To Next Page
Loading...
