Panasonic HX-WA2 - Dubbing Images Onto Other Video Devices

- 133 -
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Images are dubbed in standard quality.
≥ Set to Playback mode. (l 41)
1 Connect the unit to the recording equipment and
begin playback on the unit.
≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in playback mode. Check on
the TV screen instead.
2 Start recording on the connected device.
Copy/Dubbing
Dubbing images onto other video
devices
Change the video input
on the video device and
TV that this unit is
connected to.
≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥ See the operating
instructions of the video
device for details.
≥ Insert the plugs as far as
they will go.
≥ Do not use any other AV
cables except the supplied
one.
A AV cable (supplied)
HX-DC2
HX-WA2
