- 89 -
You can change the light-metering method used to measure brightness.
≥ [SCENE MODE] will be set to (OFF) when the [METERING
MODE] is set to (CENTRE) or (SPOT) while the [SCENE
MODE] (l 82) is set to (HDR (Backlight Comp.)).
[METERING MODE]
[MENU]: # [METERING MODE] # desired setting
(MULTI): The unit automatically assesses the
distribution of brightness over the
screen and meters to ensure that the
exposure is appropriate.
(CENTRE): The unit averages light measurements
over the entire screen, giving higher
weight to the subject at the centre of the
screen.
(SPOT): The unit meters the subject over spot
meter target ( ) displayed at the
centre of the LCD monitor.
To Next Page
Loading...
