- 43 -
(When [DISP] is selected)
Select the year/month/day display method using the
SET button.
4 Press the SET button.
5 Select [SAVE DATE AND TIME] using the SET button
and then press the SET button.
≥ To return to the recording screen or playback screen, press the MENU
button.
≥ At the time of purchase, the [CLOCK SET] is not set.
≥ If the date and time have not been set or the built-in clock battery has
run down, the screen display and recording day/month/year
information will appear as follows.
Recording screen display: --.--.---- -:--
Recording day/month/year information: 01.01.2012 0:00
≥ To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery for approximately 2 days, the time settings
will be stored for approximately 7 days. (The charging continues even
when the unit is turned off)
≥
[Before using the unit under water] and [Maintenance after use in
water] are displayed when setting date and time for the first time after
purchase. Please check beforehand to maintain the waterproof
performance. Press the MENU button to exit the message screen.
To Next Page
Loading...
