28 VQT4F52
Inserting/removing an SD card
Caution:
Check that the status indicator has gone off.
1 Open the rear door.
When using an SD card not from Panasonic, or one previously used on
other equipment, for the first time on this unit, format the SD card.
(l 42) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Status indicator A
≥ When this unit is accessing the SD card or built-in memory, the status
indicator lights up red.
1 Unlock the LOCK lever.
2 Slide the open/close lever.
3 Open the rear door.
Simplified-HX-WA20EG-VQT4F52_mst.book 28 ページ ２０１２年２月１３日 月曜日 午後１時３２分
To Next Page
Loading...
