10. Take out the new paper feed roller in the optional roller exchange kit.
11. Install the two new rubber rollers onto the paper feed roller shaft.
• After confirming the tabs (A) of both rubber rollers are facing outwards, insert the rubber rollers onto
the paper feed roller shaft until they click into place.
Notice
• Inserting a rubber roller with the tab facing inwards may damage the roller.
12. Install the paper feed roller with the new rubber rollers.
• Insert the short side of the paper feed roller shaft (A) to the roller mount, and then insert the gear
(B) in the direction indicated by the arrow.
64 Operating Manual
Care and Maintenance
To Next Page
Loading...
