Why is the scan speed so slow on my Panasonic Scanner?
If your Panasonic Scanner's scan speed is slow, and it is connected via USB, ensure you are using a USB 2.0, USB 3.0, or USB 3.1 connection. If you are using a LAN connection, the scanning speed may be affected by network traffic. Consult your network administrator in this case.
How to fix a Panasonic Scanner that won't start scanning?
If your Panasonic Scanner doesn't start scanning even with a document loaded, it could be due to these reasons: - The document may not be loaded correctly. Make sure to load it properly. - The scanner's sensor might not be detecting the document because the edge is curled. Flatten the document before loading it again.
Why is my Panasonic KV-S1058Y Scanner not recognized by the computer?
There are several reasons why your Panasonic Scanner might not be recognized: - The USB cable may not be correctly connected. Ensure it is properly connected. - The software may not be installed correctly. Try uninstalling and reinstalling the software. - The scanner may be connected via a USB hub. Avoid connecting it through a USB hub. - There might be a problem with the USB cable. Use the USB cable that came with the scanner. - The scanner might have turned off due to inactivity. Press the power button to turn it back on.
What to do if the LED (Green) does not light when the Panasonic Scanner’s power is turned ON?
If the green LED doesn't light up when you turn on your Panasonic Scanner, the power cord might not be plugged in properly. Ensure the power plug is firmly inserted.
Why is the color of the scanned document extremely different from the original on my Panasonic KV-S1058Y Scanner?
If the color of the scanned document from your Panasonic Scanner is extremely different from the original, adjust your computer monitor settings. Also, try increasing the [Chroma] value in the scanning conditions, as the scanner may not be capturing the color properly.
Why double feed is detected when scanning cards on Panasonic KV-S1058Y Scanner?
If a double feed is detected when scanning cards with your Panasonic Scanner, the cards are likely set in portrait orientation. Either disable the double feed detection function or set the cards in landscape orientation.
What if my Panasonic KV-S1058Y Scanner doesn't start scanning even though the document is loaded?
If the document has been loaded on the feed tray, but the scanner does not start scanning: * The document is not loaded properly: Load the document correctly. * The sensor cannot detect the document as the edge of the document is curled: Flatten the document and load it again.
What to do if a double feed is detected when scanning cards on my Panasonic KV-S1058Y?
If a double feed is detected when scanning cards, it might be because the cards are set in portrait orientation. Either disable the double feed detection function or set the cards in landscape orientation.
Why is my Panasonic KV-S1058Y Scanner double feeding frequently?
Double feeding may occur frequently due to several reasons: * The paper feed roller or double feed prevention roller is dirty: Clean the paper feed roller or double feed prevention roller. * The paper feed roller or double feed prevention roller have become worn down: Replace the paper feed roller or double feed prevention roller. * The double feed detectors are dirty: Clean the double feed detectors. * Right and left sides of the document to be scanned are not the same in height because of curling or folding: Flatten the document and load it again after reducing the number of sheets. * The document is printed on an unsupported type of paper or thick paper: Make a copy of the document on paper of a compatible type and thickness, and then scan the copy. * The length of the pape...
Why do vertical streaks appear on scanned documents from my Panasonic KV-S1058Y?
Vertical streaks typically appear because the scanning glasses are dirty. Clean the conveyor and scanning glasses. The problem may also be resolved by using "Vertical Line Reduction" in User Utility.
Safety notices, handling, installation, and security management guidelines.
Guidance on scanner placement, moving, and installing the necessary software.
Powering on/off, sleep mode, and setting date/time and language.
Details on compatible/incompatible documents, loading, and using special guides for ADF.
Overview of USB, Network PC, and Preset Scan modes for automated scanning workflows.
Steps to configure network and scanning conditions for Preset Scan mode.
Using Information, Function, Scan, Network, Server, and Administrator tabs for setup.
Procedure to safely remove jammed paper from the scanner's feed tray and exit areas.
Guidance on resolving common issues like scanner not recognized, slow speed, or paper feed problems.
Reference for scanner error codes, their causes, and recommended remedies.
General| Type | Document Scanner |
|---|---|
| Optical Resolution | 600 dpi |
| Maximum Paper Size | A4 |
| Weight | 3.6 kg |
| Interface | USB 3.0 |
| Image Sensor | CIS |
| Light Source | LED |
| Scanning Modes | Color, Grayscale, Black & White |
| Maximum Document Size | A4 |
| Scanning Technology | CIS (Contact Image Sensor) |
| Duty Cycle | 4000 sheets per day |
| Supported OS | Windows |
| Scanning Method | Duplex |
| Power Consumption | 18 W |
| Scanning Speed (A4, Color, 300 dpi) | 30 ppm |
| Scanning Speed | 30 ppm |
| Scanning Speed (Color, A4, 200dpi) | 30 ppm |
To Next Page
