2
Clearing Paper Misfeeds
1. Torn paper, thin paper or paper that is creased on the top edge may cause a paper misfeed. If a paper misfeed occurs, remove the misfed sheet
according to the following procedure:
a. Remove all documents from the feed tray.
b. Press the ADF door release ① and open the ADF door ② as shown in illustration 2 below.
Illustration 2
c. Remove the misfed document.
i. If the document has stopped in the feed tray area, pull it backwards as shown below.
Illustration 3
d. If document has stopped in the exit area, pull it forward as shown in the illustration 4 below.
e. Close the ADF door until it clicks into place as shown in illustration 5 below.
Illustration 4 Illustration 5