Automatic Dialing
20
For rapid access to frequently dialed numbers, the unit provides 14 stations for one-touch dial.
●
Station 1 can be alternatively used as a broadcast key (p. 33).
1
Press twice.
Display:
2
For station 1:
Press station 1 key.
Press to go to the next prompt.
For stations 2–7:
Press one of the station keys.
For stations 8–14:
Press , then press one of the
station keys.
3
Enter the name, up to 10 characters (see
page 17 for instructions).
Example:
4
Press .
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
●
If you want to enter a hyphen, press .
6
Press .
●
To program other stations, repeat steps 2
to 6.
7
Press to exit the program.
Helpful hint:
●
You can confirm the stored stations on the
telephone number list (p. 69).
Note:
●
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
●
Press or to move the cursor to the
incorrect character/number, and make the
correction.
To delete a character/number
●
Move the cursor to the character/number you
want to delete, and press .
To Next Page
Loading...
