Panasonic KX-FHD301

44
Receiving Faxes
Pager call - when the unit receives a fax!
This feature allows your unit to call your pager when your unit receives a fax document.
1
Press .
Display:
2
Press , then .
3
Press or to select “ON”.
●
If this feature is not required, select
“OFF”.
4
Press .
5
Enter your pager number up to 30 digits.
Example:
6
Press .
7
Enter your pager access code up to 10 digits
if required.
Example:
8
Press .
●
The default code 07734 will show
“Hello!” on your pager.
●
If you want to change this message,
enter your message up to 30 digits.
Example:
MSG.=5555
MSG.=07734
SET
PIN=12345678
PIN=
SET
NO.=12025551234
NO.=
SET
FAX PAGER CALL
MODE=ON [±]
FAX PAGER CALL
MODE=OFF [±]
7 0
SYSTEM SET UP
PRESS NAVI.[I H]
MENU
MONITOR
SET
MENU
Display
5555
Pager
Your pager will display the message you
entered in step 8. (For example: 5555)
When your pager receives a pager call
Note:
●
If you have subscribed to a Caller ID service,
your pager will display the caller’s telephone
number instead of the message.
9
Press .
●
The unit will dial the stored
number.
10
Check that your pager received
the pager test call.
11
Press .
MONITOR
PAGER TEST
SET