Document weight
Single sheet:
45 g/m
2
to 90 g/m
2
(12 lb. to 24 lb.)
Multiple sheets:
60 g/m
2
to 75 g/m
2
(16 lb. to 20 lb.)
Note:
●
Remove clips, staples or other similar fasteners.
●
Check that ink, paste or correction fluid has dried.
●
Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbonless duplicating paper
— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
●
To transmit the document(s) whose width is less than the letter size (216 mm) or A4 size (210 mm), we
recommend using a copier machine. Copy the original document on to a letter size paper, then transmit
the copied document.
To transmit more than 15 pages at a time
●
Insert the first 15 pages of the document. Add the other pages (15 at a time) before the last page is fed
into the unit.
Sending report
This report will provide you with a printed record of transmission results. For the communication
message in the result column, see page 56. To use this feature, activate feature #04 (p. 50).
Journal report
The unit stores the 30 most recent fax communication results. For the communication message
in the result column, see page 56. When a new communication occurs, the oldest
communication result will be erased.
— To print manually, see page 69.
—
To print automatically after every 30 new fax communications, activate feature #22 (p. 52).
Reports for confirmation!
To Next Page
Loading...
