Panasonic KX-FHD351

Connections and Setup
19
For Fax Advantage assistance, call 1-800-435-7329.
How to set up
When you are IN house or
office
Set the fax machine to TEL mode by pressing
{AUTO ANSWER} until the following is
displayed.
How to receive calls
With the fax machine
1 When the fax machine rings, press
{DIGITAL SP-PHONE} or lift the handset.
2 If document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press {FAX/START}.
3 Replace the handset if using it.
L The fax machine will start fax reception.
With an extension telephone
1 When the extension telephone rings, lift the
handset of the extension telephone.
2 When document reception is required, a fax
calling tone (slow beep) is heard, or no
sound is heard, press {*}{#}{9} (pre-
selected fax activation code) firmly.
3 Replace the handset.
L The fax machine will start fax reception.
Note:
L You can change the fax activation code in
feature #41 (page 72).
When you are OUT of house or
office
1 Set feature #77 to TAD/FAX mode (page
74) beforehand.
2 Press {AUTO ANSWER} until the following
is displayed.
L The display will show the number of
rings before the unit answers a call in
TAD/FAX mode.
3 Press {+} or {-} to select the desired ring
setting and press {SET}.
How to receive calls
If the call is a phone call, the fax machine will
record voice message automatically.
If a fax calling tone is detected, the fax machine
will receive a fax automatically.
Note:
L Do not connect an answering machine to the
same telephone line. If connected, set
automatic answer feature to off.
L Do not subscribe to voice mail service.
L If you have already subscribed to Distinctive
Ring service, refer to page 49.
L If the fax machine is used only for fax
reception, refer to page 47.
{FAX/START}
{AUTO ANSWER}
{SET}
{+}{-}
{DIGITAL SP-PHONE}
ON
OFF
TEL MODE
ON
OFF
TAD/FAX MODE
2 RINGS