Panasonic KX-FHD351

Voice Mailbox
64
Listening to recorded messages
1
Press {>} 2 times.
MAILBOX [+ -]
2 Press {+} or {-} until the desired mailbox
number is displayed.
Example: NEW MESSAGES
MAILBOX2 [±] 02
b
PRESS
REC/ERASE/PLAY
3 Press {PLAY MESSAGES}.
If you have programmed your own mailbox
password, enter it.
PASSWORD=
L Only the new recorded messages will
be played.
L If there are no new messages, the unit
will play back all the recorded
messages.
4 Press {STOP} to end the operation.
Note:
L The following features can be used during
playback. See page 57 and page 58 for
details.
– To repeat a message
– To skip a message
– To stop playback
– To change the playback speed
– To erase a specific message
To record a memo message into a mailbox
1. Press {>} 2 times.
MAILBOX [+ -]
2. Press {+} or {-} until the desired mailbox
number is displayed.
Example:
MAILBOX1 [±] 00
b
PRESS
REC/ERASE/PLAY
3. Press {RECORD}.
L A long beep will sound.
Example: BOX1 RECORDING
4. Speak clearly about 20 cm (8 inches) away
from the microphone.
5. When finished recording, press {STOP}.
To erase all the messages in a mailbox
1. Press {>} 2 times.
2. Press {+} or {-} until the desired mailbox
number is displayed.
Example:
MAILBOX1 [±] 01
b
PRESS
REC/ERASE/PLAY
3. Press {ERASE}.
BOX1 ERASE OK?
YES:SET/NO:STOP
4. Press {SET}.
{SET}
{>}{+}{-}
{STOP}
{ERASE}
{RECORD}
{PLAY MESSAGES}