Panasonic KX-FHD351

Automatic Dialing
28
Telephone
Storing names and telephone numbers into
one-touch dial
For rapid access to frequently dialed numbers, the unit provides 10 entries for one-touch dial.
L Station 1 can be used alternatively as broadcast key (page 42).
1 Press {MENU} repeatedly until the
following is displayed.
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
2 Select the desired station key.
For station 1:
1. Press station 1.
STATION 1
DIAL MODE [±]
2. Press {SET}.
For stations 2–5:
Press one of the station keys.
For stations 6–10:
Press {LOWER}, then press one of the
station keys.
3 Enter the name, up to 10 characters (see
page 26 for instructions).
Example: NAME=JOHN
STORE:PRESS SET
4 Press {SET}.
Example: <S01>=
5 Enter the telephone number, up to 30 digits,
using the dial keypad.
Example: <S01>=1114497
L If you want to enter a hyphen, press
{FLASH}.
6 Press {SET}.
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.
L To program other entries, repeat steps 2
to 6.
7 Press {STOP} to exit the program.
Helpful hint:
L You can confirm the stored entries in the
telephone number list (page 90).
Note:
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
{SET}
{<}{>}
{STOP}
(Delete)
{FLASH}
(Hyphen)
{LOWER}
{MENU}
Station keys