8. Help
51
8.3.8 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If delayed transmission (feature #25 on page 39) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
The other party complains
that they cannot leave a voice
message.
L The recording time is set to “GREETING ONLY”. Select “1 MINUTE”, “2
MINUTES” or “3 MINUTES” (feature #10 on page 37).
L The memory is full. Erase unnecessary messages (page 34).
L Make sure there is no other answering machine connected on the same
line.
Caller ID information does not
display during message
playback.
L The caller information will not be displayed if a message is recorded by
using {MEMO} (page 34).
Problem Cause & Solution
FP205-215E-PFQX2485ZA-en.book Page 51 Wednesday, April 26, 2006 6:34 PM
To Next Page
Loading...
