58
KX-FP701ME
8.6. Installing the Recording Paper
The unit can hold up to 50 sheets of 60 g/m
2
to 90 g/m
2
paper.
1. Fan the paper to prevent paper jams.
2. Pull the tension plate forward ( ) and insert the paper
gently, print-side down ( ).
• The paper should not be over the tab ( ).
• If the paper is not inserted correctly, remove all of the
installed paper, and re-install it gently. Otherwise the
paper may jam.
Note:
• Remove all of the installed paper before adding paper.
Document requirements
Document weight
• When faxing a single sheet:
45 g/m
2
to 90 g/m
2
• When faxing a multiple sheet:
60 g/m
2
to 80 g/m
2
Note:
• Remove chips, staples or other fasteners.
• Do not send the following types of documents. (Make a copy
of the document using another copier and send the copy.)
— Chemically treated paper such as carbon or carbonless
duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen
through the other side, such as newsprint
• Check that ink, paste or correction fluid has dried com-
pletely.
• To send a document with a width of less than 210 mm, we
recommend using a copy machine to copy the original docu-
ment onto A4 or letter-sized paper, than sending the copied
document.
To Next Page
Loading...
