Panasonic KX-FP701ME

8
KX-FP701ME
3 Specifications
Any details given in these instructions are subject to change without notice.
*
1
Transmission speed depends on the contents of the pages, resolution, telephone line conditions and capability of the other
party’s machine.
*
2
Transmission speed is based on the ITU-T No. 1 Test Chart with memory scanning original mode. If the capability of the other
party’s machine is inferior to your unit, the transmission time may be longer. (Refer to ITU-T No.1 Test chart (P.166).)
*
3
If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm in width, Max. 600 mm in length
Effective Scanning Width: 208 mm
Recording Paper Size: Letter: 216 mm × 279 mm
Effective Printing Width: 208 mm
Recording Paper Weight:
60 g/m
2
to 90 g/m
2
Transmission Speed*
1
: Approx. 12 s/page*
2
Scanning Density: Horizontal: 8 pels/mm
Vertical:
3.85 lines/mm (standard resolution)
7.7 lines/mm (fine/photo resolution)
15.4 lines/mm (super fine resolution)
Photo Resolution: 64 levels
Scanner Type: Contact Image Sensor
Printer Type: Thermal Transfer on plain paper
Data Compression System: Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
Modem Speed: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment: 5—35°C, 20—80 % RH (Relative Humidity)
Dimensions: Approx. height 185 mm × width 355 mm × depth 272 mm
Mass (Weight): Approx. 3.5 kg
Power Consumption: Standby: Approx. 1.5 W
Transmission: Approx. 12 W
Reception: Approx. 30 W (When receiving a 20% black document)
Copy: Approx. 40 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
Power Supply: 120 V AC, 60 Hz
Fax Memory Capacity*
3
:
Transmission: Approx. 25 pages
Reception: Approx. 28 pages
(Based on the ITU-T No. 1 Test Chart in standard resolution, without using the Error
Correction Mode.)