Panasonic KX-FP701ME - Page 98

98
KX-FP701ME
OK means "can set".
NG means "can not set".
Note:
•
*1
: Power is OFF/ON after changing this set value.
• Refer to Service Function Table (P.64) for descriptions of the individual codes.
Example:
If you want to set value in the "004 Print confirmation report", press the dial key number 1,2 or 3 corresponding to the Set Value
you want to select. (1:ERROR / 2:ON / 3:OFF)
596 Transmit level set -15~00dbm -11dbm OK
598
*1
Receiving Sensitivity -20~-48dbm -42dbm OK
599 ECM Frame size 1:256 / 2:64 256byte OK
710 Memory clear except History data --------- --------- NG
717 Transmit speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
718 Receive speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
722 Redial tone detect 1:ON / 2:OFF OFF OK
745 Power on film feed 1:ON / 2:OFF ON OK
763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK
773 DIS-DCS interval 1:500msec / 2:200msec 200ms OK
774 T4 timer 00~99 x 100ms 00ms OK
815 Sensor & VOX test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~9 mm 9 OK
861 Paper size 1:A4 / 2:LETTER LETTER OK
874 DTMF ON time 06~20 × 10msec 10 × 10msec OK
875 DTMF OFF time 06~20 × 10msec 10 × 10msec OK
880 History list 1:Start --------- NG
881 Journal 2 1:Start --------- NG
882 Journal 3 1:Start --------- NG
991 Remote Setup list 1:Start --------- OK
994 Remote Journal list 1:Start --------- OK
995 Remote Journal 2 list 1:Start --------- OK
996 Remote Journal 3 list 1:Start --------- OK
998 Remote History list 1:Start --------- OK
999 Remote Service list 1:Start --------- OK
Code Function Set Value Default Remote Set-
ting