Operating Instructions
100
2.
Make a hole for a cable.
3.
Fix the rubbers and dents of Network Camera to the Ceiling Plate A and fix
them firmly.
• Make sure Network Camera, using coins etc., is firmly fixed.
4.
Fix the Ceiling Plate A to the Ceiling Plate B and fix them firmly with Screws A.
Note
Install Network Camera so that the connecting part comes to the front.
Hole for a cable: 25 mm (1 inch)
65 mm (2.5 inches)
Fit the four rubbers in place.
Fit the two dents
in place.
Fit the hooks to the holes and move
in the counterclockwise direction.
Screws A
(2 pcs.)
Four Tabs
Fix firmly with Screws A.
To Next Page
Loading...
