Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
5.
Connect the cable and fix the Ceiling Mounting Cover. Adjust the "l" of the main
unit to the "l" of the Ceiling Mounting Cover.
• Be careful not to nip the cable etc.
6.
Move the Ceiling Mounting Cover in the clockwise direction until the "l" of it fits
to the "•" of the main unit.
• When removing the Ceiling Mounting Cover, move it in the
counterclockwise direction. Adjust both "l" and let down the main unit.
Wiring without making a hole for a cable in the ceiling
• Follow the steps 1), 3), 4), 5) and 6). Making a hole is not necessary.
• Remove the tab of Ceiling Mounting Cover and wire through the notch.
To Next Page
Loading...
