Value Range Max. 64 characters
Note
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
• If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.
Default Value Panasonic-{MODEL}/{fwver} ({mac})
Configuration File Reference SIP_USER_AGENT
4.5.1.2 NAT Identity
Enable Rport (RFC 3581)
Description Selects whether to add the 'rport' parameter to the top Via header
field value of requests generated.
Value Range
• Yes
• No
Default Value No
Configuration File Reference SIP_ADD_RPORT
Enable Port Punching for SIP
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for SIP
packet.
Value Range 0, 10–300
0: Disable
Default Value 0
Configuration File Reference PORT_PUNCH_INTVL
Enable Port Punching for RTP
Description Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.
Value Range 0, 10–300
0: Disable
Default Value 0
Configuration File Reference RTP_PORT_PUNCH_INTVL
4.5.1 SIP Settings
Document Version: 2017-07 Administrator Guide 115
To Next Page
Loading...
