Menu list
T
o access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4 Press MCN or MDN to select the desired setting. a MSAVEN
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#160.
2 Select the desired setting. a MSAVEN
Note:
R To exit the operation, press MOFFN.
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R D
isplay menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
M
ain menu:
“Home network”
Sub-menu 1 Sub-menu 2 Settings Code
Arm/Disarm
*
1
– – #800 37
Check sensor
s
tatus
– – #801 38
Smart Plug
– – #802 39
For assistance, please visit www.panasonic.com/support
21
Programming
To Next Page
Loading...
