R M
ake sure you have the operating
instructions included with your wireless
router handy.
R The hub cannot find your wireless router if
the wireless router does not broadcast its
SSID. If there is a “stealth mode” setting,
turn it off; if there is a “SSID broadcast”
setting, turn it on. Change the appropriate
setting before performing this procedure,
and then change it back when finished.
Wi-Fi network access settings
1 MM
ENUN#523
R The hub searches for available
wireless networks and
“Searching...” is displayed on the
handset.
R When searching is complete, a list of
available wireless networks is
displayed, including the SSID, security
setting, and signal strength.
2 MbN: Select your wireless router’s SSID.
a MSELECTN
3 Confirm the SSID and then press MOKN.
4 Enter the password required to access
the wireless network. a MOKN
R For information about entering
characters, see “Character table”,
page 41.
R After the hub connects to the wireless
router, “Connected to” and your
wireless router’s SSID is displayed.
5 MOFFN
Advanced configuration (static IP
s
ettings)
After using the procedure explained in “Wi-Fi
network access settings”, page 29, use the
procedure below to set the hub’s IP settings
manually if necessary.
This procedure is not necessary for most
users.
1 MMENUN#500
2 MbN: “Manual (Static)” a MSELECTN
3 MbN: Select the desired item. a
MSELECTN
4 E
nter the desired setting. a MOKN
R Press MFEN to move the cursor if
necessary.
5 Set the other items as necessary.
6 MbN: MSAVEN a MOFFN
Confirming network status
1 MM
ENUN#526
2 MbN and MFEN: Display the desired
information. a MOFFN
Resetting the hub’s network
s
ettings
All network-related settings will be reset to the
default settings. No other information will be
deleted.
1 MMENUN#730
2 MbN: “Yes” a MSELECTN.
3 MOKN
R The hub restarts. Wait until the hub
LED indicator lights in yellow and then
set the Wi-Fi network access settings
using Home Network app. For more
information, refer to the User’s Guide
(page 40).
Voice mail service
V
oice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
Important:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
For assistance, please visit www.panasonic.com/support
29
Programming
To Next Page
Loading...
