2.2 Turning the power switch ON
Turn the power switch to the ON position (A).
2.3 Dialing mode (KX-MB2030
only)
If you cannot dial (page 41), change this setting
according to your telephone line service.
1 MMenuN
2 Press MBNM1NM2NM0N to display “DIALING MODE”.
3 Press M1N or M2N to select the desired setting.
M1N “PULSE”: For rotary/pulse dial service.
M2N “TONE” (default): For tone dial service.
4 MSetN
5 Press MMenuN to exit.
18
For assistance, please visit http://www.panasonic.com/help
2. Preparation
To Next Page
Loading...
