Panasonic KX-MB2000

1.3 Button descriptions
ABCDEFGHIJ K
MN Q RPOSTUVW
L
* The pictured model is KX-MB2030.
Station keys (KX-MB2030 only)
R To use the one-touch dial feature (page 42,
43).
MManual BroadN (KX-MB2030 only)
R To send a document to multiple parties by using
the dial keypad (page 44).
MBroadcastN (KX-MB2030 only)
R To send a document to multiple parties
(page 44).
MScanN
R To switch to the scan mode (page 19, 30).
MCopy SizeN
R To select the copy size (page 34).
MPhonebookN (KX-MB2030 only)
R To initiate the phonebook (page 43, 45).
For beep sounds (KX-MB2000/KX-MB2010 only)
R Key beeps etc. will be heard.
MContrastN
R To select the contrast when copying (page 34).
R To select the contrast when sending a fax
(KX-MB2030 only) (page 41).
MResolutionN
R To select the resolution when copying
(page 34).
R To select the resolution when sending a fax
(KX-MB2030 only) (page 41).
MZoomN
R To enlarge or reduce a document when copying
(page 35).
MQuick ScanN (KX-MB2030 only)
R To store a scanned document into memory, and
then send it (page 42).
MPage LayoutN
R To make copies using various page layouts
(page 36).
MCaller IDN (KX-MB2030 only)
R To use Caller ID features (page 51).
MMenuN
R To start or exit programming.
MStopN
R To stop an operation or programming session.
R To erase a character/number.
MLowerN (KX-MB2030 only)
R To select station 4-6 for the one-touch dial feature
(page 42, 43).
MFax Auto AnswerN (KX-MB2030 only)
R To turn the auto answer setting ON/OFF
(page 46).
MFaxN (KX-MB2030 only)
R To switch to the fax mode (page 19, 41).
MCopyN
R To switch to the copy mode (page 19, 34).
MRedialNMPauseN (KX-MB2030 only)
R To redial the last number dialed. If the line is busy
when you send a fax, the unit will automatically
redial the number 1 time.
R To insert a pause during dialing.
MFlashN (KX-MB2030 only)
R To access special telephone services or for
transferring extension calls.
MMonitorN (KX-MB2030 only)
R To initiate dialing.
When you press MMonitorN while receiving a call,
you will be able to hear the other party, but the
other party will not be able to hear you.
Navigator key
R To select desired settings.
R To adjust the volume (KX-MB2030 only)
(page 21).
R To search for a stored item (KX-MB2030 only)
(page 43).
MSetN
R To store a setting during programming.
MToneN (KX-MB2030 only)
R To change from pulse to tone temporarily during
dialing when your line has rotary/pulse service.
MStartN
R To copy a document (page 34).
R To scan a document (push scan) (page 30).
R To send a fax (KX-MB2030 only) (page 41).
8
For assistance, please visit http://www.panasonic.com/help
1. Introduction and Installation