11.1.5 PC print features
Feature/Code Selection
Changing the data timeout
setting
MBNM7NM7NM4N
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. MMenuN A MBNM7NM7NM4N A MSetN
2. Enter the desired data timeout setting from “005” seconds to “600”
seconds, using the dial keypad.
R The default setting is “060” seconds.
3. MSetN A MMenuN
Setting mutual A4/letter print
MBNM7NM7NM6N
This feature allows printing in A4-size even if letter-size recording paper is
loaded in the paper input tray, and vice versa.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): Printing is possible between A4/letter-size.
91
11. Programmable Features
To Next Page
Loading...
