Panasonic KX-MB2230JT - Page 170

170
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
12.2.2.2. Service Function
Code Function Set Value Default Remote Setting
501 Pause time set 001~600 x 100msec 030 OK
503 Dial speed 1:10pps / 2:20pps 10pps OK
507 V34 transmission start speed 0:Disable / 1:33.6 / 2:31.2 / 3:28.8 /
4:26.4 / 5:24.0 / 6:21.6 / 7:19.2 / 8:16.8
33,600bps OK
508 V34 reception start speed 0:Disable / 1:33.6 / 2:31.2 / 3:28.8 /
4:26.4 / 5:24.0 / 6:21.6 / 7:19.2 / 8:16.8
33,600bps OK
514 Bell signal detect time 1~9 x 100msec 3 OK
520 CED frequency select 1:2,100Hz / 2:1,100Hz 2,100 OK
521 International mode select 1:ON / 2:OFF ON OK
522 Auto standby select 1:ON / 2:OFF ON OK
523 Receive equalizer select 1:0kms / 2:1.8km / 3:3.6km / 4:7.2km 0km OK
524 Transmission equalizer select 1:0kms / 2:1.8km / 3:3.6km / 4:7.2km 0km OK
527 V8 function select 1:OFF / 2:ON ON OK
529 Memory clear for Call Service --------- --------- NG
550 Memory clear --------- --------- NG
551 ROM check --------- --------- NG
552 DTMF signal tone test 1:ON / 2:OFF OFF OK
553 Monitor on FAX communication select 1:OFF / 2:Phase B / 3:ALL OFF OK
554 Modem test --------- --------- NG
555 Scanner test --------- --------- NG
556 Motor test --------- --------- NG
557 LED test --------- --------- NG
558 LCD test --------- --------- NG
561 KEY test --------- --------- NG
565 Irregular data set 1:Non_delete 2:delete 1 OK
567 T0 timer 001~255sec 052 OK
570 Break% select 1:61% / 2:67% / 3:63% 61% OK
573 Remote turn-on ring number set 00~99 10 OK
574 Dial tone detect check 1:ON / 2:OFF OFF OK
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line disconnection time set 001~999sec 65 OK
592 CNG transmit select 1:OFF / 2:ALL / 3:AUTO ALL OK
593 Time between CED and 300bps 1:75ms / 2:500ms / 3:1sec 75ms OK
594 Overseas DIS detection select 1:1st / 2:2nd 1st OK
595 Receive error limit value set 1:5% / 2:10% / 3:15% / 4:20% 10% OK
596 Transmit level set -15~00dBm 10 OK
598 Receiving Sensitivity 20~48 48 OK
599 ECM Frame size 1:256 / 2:64 256byte OK
628 H.V.P.S check --------- --------- NG
639 LSU test --------- --------- NG
655 Cause distinction code of call service 3 --------- --------- NG
677 FAN test --------- --------- NG
710 Memory clear except history data --------- --------- NG
711 Dialing mode 1:PULSE / 2:TONE TONE OK
717 Transmit speed select 1:14,400bps / 2:12,000bps /
3:9,600bps / 4:7,200bps / 5:4,800bps /
6:2,400bps
14,400bps OK
718 Receive speed select 1:14,400bps / 2:12,000bps /
3:9,600bps / 4:7,200bps / 5:4,800bps /
6:2,400bps
14,400bps OK
721 Pause tone detect 1:ON / 2:OFF OFF OK
722 Redial tone detect 1:ON / 2:OFF ON OK
763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK
774 Receiving T4 timer 00~99 × 100msec 00 OK
775 Transmission T4 timer 00~99 × 100msec 00 OK
796 Attach sending image to sending report 1:ON / 2:OFF 1 OK
815 Sensor check --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~11 x 0.5mm 6 OK
854 Left margin 1~11 x 0.5mm 6 OK
856 Top margin (Duplex) 1~11 x 0.5mm 6 OK
870 Left margin (OPF) 1~11 x 0.5mm 6 OK
871 Left margin (Duplex) 1~11 x 0.5mm 6 OK
874 DTMF ON time 060~200msec 100 OK
875 DTMF OFF time 060~200msec 100 OK