171
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
OK means “can set”.
NG means “can not set”.
Note:
Refer to Service Function Table (P.130) for descriptions of the individual codes.
Example:
If you want to set value in the “401 PRINT SENDING REPORT”, press the dial key number 1, 2 or 3 corresponding to the Set
Value you want to select. (1:ERROR/2:ON/3:OFF)
880 History list --------- --------- NG
881 Journal 2 --------- --------- NG
882 Journal 3 --------- --------- NG
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
Code Function Set Value Default Remote Setting
To Next Page
Loading...
