Panasonic KX-NT700

Function Buttons ([F1], [F2], and [F3])
Press a function button to select the function
displayed directly above it. For example, in the
illustration here, press [F3] to select
(phonebook).
MIC NOISE CUT Button
BACK Button
MENU Button
ENTER Button
Playback Control Buttons
Basic Connections
E
D
A
LINE
LAN DC IN
B
C
F
AC Adaptor Cord
LAN Cable
2-conductor Telephone Cord
To AC Outlet
To Switching Hub
Telephone Jack or PBX (RJ11C)
Note
• If using an AC adaptor, use only the included AC
adaptor (PQLV206).
• To use PoE (Power over Ethernet), connect the
LAN cable to a PoE-compatible (IEEE802.3af)
switching hub. The included AC adaptor does
not need to be connected when using PoE.
Connecting a Portable Station (PS)
Connect the included PS Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the headset jack of the
PS.
A
Connecting a Computer
Connecting using the USB cable
Connect the included USB Cable to the USB port (A) of
the unit, and to the USB port of the computer.
USB
A
Connecting using the PC cable
Connect the included PC Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the microphone jack
(red plug; B) and headphone jack (green plug; C) of
the computer.
A
C
B
Connecting an External Wired MIC
An optional KX-NT701 External Wired MIC can be
connected to the unit using the EXT MIC1 (A) or EXT
MIC2 (B) jacks. 2 mics can be connected.
A
B
4 Quick Reference Guide Document Version 2010/02
Quick Reference Guide