Answering Calls
1. Press [ ] or
.
2. To end the call, press [ ].
Note
• When "Line Selection" is set to "IP +
PC" or "IP + PS", TEL calls cannot be made or
received.
Receiving a Second Call
While on a call, you can receive a second call, and then
join the 2 calls and establish a conference call.
Confirming the caller then creating a
conference call
1. Press
.
• The first call is put on hold, and you can talk to
the second caller.
• To end the second call, press
, then
continue the first call.
2. Press
to establish a conference call.
Refusing a second call
Press
. The second caller is disconnected and
the current call continues.
Note
• When the "Operation Mode" setting is set to
"IP-PBX", only 1 IP call is possible. To have a
conference call, you must use the IP line for 1
party, and the TEL, PS, or PC line for the other
party.
Useful Features
Conferencing Phone Manager (CPM)
CPM is computer software that can be used in
conjunction with the unit. It includes the following useful
features:
• Video conferencing
• Sharing applications
• Making calls using the phonebook or call history
See the Operating Instructions for Conferencing Phone
Manager for more details.
Recording
Conversations and voice memos can be recorded to an
SD memory card (32 MB–2 GB). Insert the SD memory
card with the label side facing up.
To record a conversation, press
during the
conversation.
Speech Speed Conversion
You can adjust the speed of the other party's speech
down during a call by pressing
. Press repeatedly
to change the current setting or turn the feature off.
"Slow" is shown on the display while this feature is
active.
Mic Noise Reduction
You can press the [MIC NOISE CUT] button during a
call to reduce the ambient noise that is picked up by the
microphones and sent to the other party. Press
repeatedly to change the current setting or turn the
feature off.
"Noise Cut ON" is shown on the display while this
feature is active.
Document Version 2010/02 Quick Reference Guide 7
Quick Reference Guide
To Next Page
Loading...
