Useful Information
66
I cannot operate the answering
system.
L Another handset or the base unit user is using the
answering system, SMS features, accessing the
caller list or changing base unit settings. Wait for the
other user to finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move
closer.
I cannot operate the answering
system remotely.
L You are entering the wrong remote access code.
Confirm that the correct remote code is entered. If
you forget the remote access code, store a new
remote access code again (page 50).
L You are pressing the dial keys too quickly. Press
each key firmly.
L The answering system is turned off. Turn it on (page
51).
L You are using a pulse telephone. Try again using a
touch tone phone.
While recording a greeting
message or listening to messages,
the unit rings and recording stops.
L A call is being received. Answer the call and try
again later.
Problem Cause & solution
TCD230-240FX(e).book Page 66 Wednesday, June 8, 2005 7:15 PM
To Next Page
Loading...
