KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUВ I KX-A140RUC I KX-A140RUF
16 RF SPECIFICATION
16.1. Base Unit
Item Value Refer to -. * Remarks
TX Power More than 20 dBm ~ 25 dBm
Adjustment (H)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (I)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (J)
RX Sensitivity < 1000 ppm
Adjustment (K)
Timing Accuracy < ± 5.0 ppm
Adjustment (L)
RSSI Level 0x34 hex ± A hex
Adjustment (M)
* : Refer to Adjustment (P.37)
16.2. Handset
Item Value Refer to -. ** Remarks
TX Power More than 20 dBm ~ 25 dBm
Adjustment (I)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (J)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (K)
RX Sensitivity < 1000 ppm
Adjustment (L)
Timing Accuracy < ± 10 ppm
Adjustment (M)
RSSI Level 0x34 hex ± A hex
Adjustment (N)
: Refer to Adjustment (P.42)
17 HOW TO CHECK THE HANDSET SPEAKER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
46
To Next Page
Loading...
