Panasonic KX-TCD400RUB

KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUB I KX-A140RUC I KX-A140RUF
20.2. Power Supply Circuit
The power is supplied to the DECT BBIC, RF Module, EEPROM, Relay Coil, LED and Charge Contact from AC Adaptor (+6V)
as shown in Fig.101. The power supply is as follows;
DECT BBIC (IC2): J2(+6V) ^ D4 ^ Q9 ^ D5 ^ Q8 ^ IC2
RF Module (IC3): J2(+6V) ^ D4 ^ Q9 ^ IC3
EEPROM (IC1): J2(+6V) ^ D4 ^ Q9 ^ D5 ^ Q8 ^ IC2 ^ IC1
LED (LED1): J2(+6V) ^ D4 ^ Q9 ^ R68 ^ LED1
Charge Contact (TP84): J2(+6V) ^ D4 ^ R43, R44 ^ TP84
<Fig.101>
50