KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUB I KX-A140RUC I KX-A140RUF
4 BATTERY
4.1. Battery Installation
Please ensure the batteries are inserted as shown. © part should be inserted first.
Close the cover as indicated by the arrow.
• When you replace the batteries, © part should be removed first.
4.2. Battery Charge
At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit.
Please charge the batteries fo r about 7 hours before initial use. During charging, the battery icon is as shown below.
The handset which power is off will be turned on automatically when it is placed on the base unit.
In normal use, the handset and the base unit should be powered on at all times.
Note for Service:
The battery strength may not be indicated correctly if the battery is disconnected and connected again, even after it is fully
charged.
In that case, by recharging the battery as mentioned above, you will get a correct indication of the battery strength.
8
To Next Page
Loading...
