Panasonic KX-TCD400RUB

|kX-TCD400RUB / KX-TCD400RUC / KX-TGD400RUF / KX-A140RUB / KX-A140RUC / KX-A140RUF
26.3.2. Switch Control
Address Default Name Country
Setting
Type Description
09F1 00 HsRegInfo.RegFlags x D Handset registration info - registration ON/OFF
1=reg, 0=no reg
09F2 00 HsRegInfo.EmcFlags x D Handset registration info - EMC flags
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
09F3 21 RingMode x D Ring mode. Modes used in KAMMA4 are 20h and 21h.
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
26.3.3. Flash Time setting
Address Default Name Country
Setting
Type
Description
0F0B 08 CalibBreakTime[0] 0A D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 80 ms
0F0C 14 CalibBreakTime[1] 46 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 200 ms
0F0D 46 CalibBreakTime[2] 14 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 700 ms
26.3.4. BsUiTask settings
Address Default Name Country
Setting
Type
Description
0F4B 01 Config1 13 D BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled, enabled
1: ClipDetectionSettingEnabled, disabled
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled, disabled
6: SMSPabxSupportSettingEnabled, disabled
7: Unused
0F4C F7 Config2 D7 D BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled, enabled
5: ARSIntDeletionMenuEnabled, enabled
6: ARSMultipleCarrierMenuEnabled, enabled
7: ARSMultipleAreaCodeMenuEnabled, enabled
0F4D 00 UserData.SmsPabxSuport x D SMS PABX Support On/Off
0F4E 0F Config2 00 D BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled, enabled
1: CallRestrictionMenuEnabled, enabled
2: CancelHandsetMenuEnabled, enabled
3: BaseToneMenusEnabled, enabled
4-7: Unused
60