Panasonic KX-TCD400RUB

KX-TCD400RUB I KX-TCD400RUC I KX-TCD400RUF I KX-A140RUB I KX-A140RUC I KX-A140RUF
Handset Initial Settings
Function Initial Setting Remarks (selectable options)
Time Alarm Mode OFF OFF/ON
Alarm Time Clear OFF/Once/Daily
Handset Ringer Volume 6
-
Handset External Ringer Pattern 1 20 patterns
Handset Alarm Tone Pattern 1 20 patterns
Key Tone ON ON/OFF
Range Warning Alarm OFF OFF/ON
Battery Low Alarm ON ON/OFF
Talk Mode Display Length of the Call Talk Time/Phone No.
Display Language English 10 languages
Call BAR OFF OFF/ON
Direct Call Mode OFF OFF/ON
Direct Call Number Clear Up to 24 digits
4-Digit Handset PIN 0000
-
Auto Talk OFF OFF/ON
Redial Memory All Clear
-
Handset Receiver Volume Medium Low/Medium/High
6.5. Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is on. The key lock is cancelled
if the handset is turned off.
When the key lock is on, emergency calls cannot be made until key lock is cancelled.
Key Lock On Key Lock Off
• II is displayed (Refer to Handset Display (P.19)) and all dialling buttons are locked.
6.6. Recall Feature
RECALL is used to access special telephone services. Contact your Network provider for details. If your unit is connected to
a PBX, pressing RECALL allows you to access some features of your host PBX such as transferring an extension call.
6.7. Dialling Pause for PBX line/long distance service users
A dialling pause is used when a pause in the dialling of the phone number is necessary using a PBX or accessing a long
distance service.
For example, when 9 (line access number) is dialled followed by a pause to access an outside line through a PBX:
1 C D 2 ( C * ) 3 Phone Number 4 ( ^ )
Press REDIAL.*1 Press TALK.
• Entering a pause prevents misdialling when you redial or dial a stored number.
• Pressing REDIAL once creates one pause. To extend the pause requirement time, press REDIAL accordingly.
*1 P is displayed (Refer to Handset Display (P. 19)) on the LCD.
15